設備減震無疑是汽車的重要組成部分。當車輛在行駛過程中遇到坑洞時,必須依靠設備的緩沖和阻尼來保證車身的穩定性和安全性。如果緩沖鏈損壞,將會(huì )對駕駛感覺和身體安全產生很大的影響。常見的設備減震類型有液壓設備減震、彈簧設備減震、橡膠設備減震、氣墊設備減震等。汽車上的設備減震大多是液壓設備減震。讓我們來看看今天設備減震失效檢查的方法和條件。
設備減震失效檢查方法
1.振動測試:汽車停在一個穩定的地方,按下車頭(車蓋的一部分),突然松開,身體在三次上下顛簸時上下擺動是正常的。如果連續上下晃動,就意味著設備的減震效果可能會(huì )喪失。振動現象越嚴重,設備減震損傷程度越嚴重。為了提高判斷的準確性,可以將其與同類型的普通車輛進行比較。
2.手動檢查:將設備減震從車中移除,將設備減震垂直放置,使用手動恒速往復張力設備減震活塞桿,判斷設備阻尼力是否異常,如果感覺明顯無阻力,可判斷為無效,如果存在明顯的間隙、滯后等現象,與正常設備減震相比,設備阻尼已損壞。為了判斷設備是否沒有減震能力,必須將設備垂直放置并拉出幾次,才能作出決定。
3.視覺比較法:通過觀察其他車輛輪胎的跳動情況,并與其他普通車型的車輛進行比較,判斷設備的阻尼力衰減,該方法還能檢測設備的減震和漏油情況。
設備的減震條件
1.在平坦的道路上,車輛前部的"goo"聲可以輕微聽到,當轉動急轉彎時,聲音會(huì )增強。停車檢查時,用力按住車輛前部,使其上下彈跳,出現異常的噪音,力越大,噪音就越大。
診斷1:車輛通常在糟糕的道路上行駛,保養不當,造成設備的減震和漏油,造成損壞。
解決辦法:這種情況應根據損害的嚴重程度予以修復或更換。
2.漏油,從設備主體上部滲油,一旦設備減震運動,油滴將變得越來越嚴重。
診斷2:活塞桿損壞或異物附著造成油封損壞等導致密封性能喪失。
解決方案:在這種情況下,我們建議更換新部件或新設備。
3.當你啟動或剎車時,身體劇烈上下顛簸,乘員感到不穩定。
診斷3:設備減震老化。
解決方案:建議更換減震裝置,使車身上下顛簸,減少小振動,使乘坐更加穩定舒適。